Streetbond Sealer Concentrate


Free Shipping in Continental USA

Protect and enhance pavement markings with Streetbond Sealer Concentrate, a high quality, semi-gloss sealer that can be applied to the surface of a newly completed project to help provide protection against dirt and tire pick up.

Mixing Instructions: Dilute Streetbond®
 Sealer Concentrate in a 1:1 ratio with water and mix thoroughly for 2 minutes. A small amount of StreetBond® colorant can be added during mixing to reduce sheen and improve color matching.
Surface Preparation: If using on coating that has been recently applied, verify coating is completely dry to the touch before applying sealer. For light colored surfaces, wait at least 1 hour after the coating is dry to the touch before applying sealer. If using on an aged project, ensure the surface is clean by using a backpack blower or compressed air to remove dust, debris, and surface contaminants. If water is used to clean the surface, ensure that the surface is completely dry prior to applying StreetBond® Sealer Concentrate.
Recommended Application: Using a low pressure handheld or backpack sprayer, spray sealer onto desired area. Use a soft bristle broom or roller to even out the surface coverage on textured surfaces, be sure to remove excess sealer from the grout lines and distribute sealer evenly to ensure a continuous membrane is formed. StreetBond Sealer Concentrate is milky white when sprayed, but dries clear with a semi-gloss sheen.

Coverage Rate is 300 sq ft/gallon, 

One Mixed Unit (2 jugs) covers approx. 2,000 ft2 (186 m2) depending on surface texture.

Dry time touch dry at 1–4 hours at 77°F (25°C) and 40% humidity [ASTM D5895]

Shelf life 24 months, if stored between 40°F and 90°F (4°C and 32°C)

Unit size One unit (box) of StreetBond Sealer Concentrate consists of:

  • Box contains two 1.58 gallon (6.0 liter) jugs